Power Modular Concept PMC 12, single-phase UPS up to 12 kVA
The single-phase double conversion UPS (VFI-SS 111) is designed for use as a floor-standing enclosure and for 482.6 mm
(19") installation. A display which may be rotated through 90° ensures optimum operation in both installation positions. As well
as integral batteries which may be replaced in "hot swap" mode with the system operational, the 1 – 3 kVA UPS systems also
offer a USB port and two switchable EN 60 320 C13 outputs. The parallel-redundant 4.5 and 6 kVA UPS systems have the
“hot swap” functionality of the batteries in the external battery housing. Parallel redundancy switching of up to 3 UPS systems
makes it possible to achieve outputs of up to 12 kVA in parallel mode and in N+1 redundant mode. Communication is via a
serial interface. With all UPS systems, the use of an optional SNMP card is supported, which facilitates communication via the
network.
• High-quality double-conversion technology with optimum sinusoidal output voltage
• Autonomy time may be extended with battery expansion packs
• For use in a rack or as a stand-alone enclosure
• Output classes 1, 2, 3, 4,5 and 6 kVA
• Parallel switching of the 4.5 and 6 kVA versions up to 12 kVA N+1 redundant
• Intelligent battery management system monitors battery charging and ensures system
availability.
Further protection from overloading and exhaustive discharge.
• Software compatibility in all standard operating systems included with the supply
| USP type | Supplied state | Battery packs | ||
| 1 | 2 | 3 | ||
| 1 kVA | 7 min | 1:09 h | 2:13 h | – |
| 2 kVA | 7 min | 34 min | 1:09 h | – |
| 3 kVA | 5 min | 30 min | 1:02 h | – |
| 4.5 kVA | – | 12 min | 31 min | 54 min |
| 6 kVA | – | 8 min | 20 min | 36 min |
